dmesg - second run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-358.el6.x86_64 (mockbuild@x86-022.build.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Tue Jan 29 11:47:41 EST 2013
Command line: ro root=/dev/mapper/vg_opteron-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_opteron/lv_root KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD rd_LVM_LV=vg_opteron/lv_swap SYSFONT=latarcyrheb-sun16 rd_NO_DM rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bde1c000 (usable)
BIOS-e820: 00000000bde1c000 - 00000000bde4c000 (ACPI data)
BIOS-e820: 00000000bde4c000 - 00000000bde4d000 (usable)
BIOS-e820: 00000000bde4d000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000203efff000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF4F20
DMI: HP ProLiant DL385 G7, BIOS A18 12/08/2012
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x203efff max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 base 0000FF800000 mask FFFFFF800000 write-protect
7 disabled
TOM2: 000000203f000000 aka 132080M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbde4d max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bde4d000
0000000000 - 0080000000 page 1G
0080000000 - 00bde00000 page 2M
00bde00000 - 00bde4d000 page 4k
kernel direct mapping tables up to bde4d000 @ 8000-b000
init_memory_mapping: 0000000100000000-000000203efff000
0100000000 - 2000000000 page 1G
2000000000 - 203ee00000 page 2M
203ee00000 - 203efff000 page 4k
kernel direct mapping tables up to 203efff000 @ a000-d000
RAMDISK: 3702c000 - 37fef4a7
ACPI: RSDP 00000000000f4ee0 00024 (v02 HP )
ACPI: XSDT 00000000bde1d3c0 000AC (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000bde1d4c0 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI: DSDT 00000000bde1d5c0 0CD6B (v01 HP DSDT 00000001 INTL 20061109)
ACPI: FACS 00000000bde1c140 00040
ACPI: SPCR 00000000bde1c180 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000bde1c200 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000bde1c240 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000bde1c280 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000bde1c2c0 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000bde1c4c0 0015E (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 00000000bde1c7c0 00320 (v02 AMD AGESA 00000001 AMD 00000001)
ACPI: FFFF 00000000bde1cfc0 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000bde1d140 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000bde1d180 0018C (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000bde1d340 00064 (v02 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SSDT 00000000bde2a340 00127 (v03 HP PCIE4X16 00000002 INTL 20090625)
ACPI: SSDT 00000000bde2a480 0024A (v03 HP PCIE5N6X 00000002 INTL 20090625)
ACPI: SSDT 00000000bde2a700 00125 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000bde2a840 00377 (v01 HP pmab 00000001 INTL 20090625)
ACPI: SSDT 00000000bde2abc0 05BE4 (v02 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 32 -> Node 0
SRAT: PXM 0 -> APIC 33 -> Node 0
SRAT: PXM 0 -> APIC 34 -> Node 0
SRAT: PXM 0 -> APIC 35 -> Node 0
SRAT: PXM 0 -> APIC 36 -> Node 0
SRAT: PXM 0 -> APIC 37 -> Node 0
SRAT: PXM 0 -> APIC 38 -> Node 0
SRAT: PXM 0 -> APIC 39 -> Node 0
SRAT: PXM 1 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 43 -> Node 1
SRAT: PXM 1 -> APIC 44 -> Node 1
SRAT: PXM 1 -> APIC 45 -> Node 1
SRAT: PXM 1 -> APIC 46 -> Node 1
SRAT: PXM 1 -> APIC 47 -> Node 1
SRAT: PXM 2 -> APIC 64 -> Node 2
SRAT: PXM 2 -> APIC 65 -> Node 2
SRAT: PXM 2 -> APIC 66 -> Node 2
SRAT: PXM 2 -> APIC 67 -> Node 2
SRAT: PXM 2 -> APIC 68 -> Node 2
SRAT: PXM 2 -> APIC 69 -> Node 2
SRAT: PXM 2 -> APIC 70 -> Node 2
SRAT: PXM 2 -> APIC 71 -> Node 2
SRAT: PXM 3 -> APIC 72 -> Node 3
SRAT: PXM 3 -> APIC 73 -> Node 3
SRAT: PXM 3 -> APIC 74 -> Node 3
SRAT: PXM 3 -> APIC 75 -> Node 3
SRAT: PXM 3 -> APIC 76 -> Node 3
SRAT: PXM 3 -> APIC 77 -> Node 3
SRAT: PXM 3 -> APIC 78 -> Node 3
SRAT: PXM 3 -> APIC 79 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-c0000000
SRAT: Node 0 PXM 0 100000000-840000000
SRAT: Node 1 PXM 1 840000000-1040000000
SRAT: Node 2 PXM 2 1040000000-1840000000
SRAT: Node 3 PXM 3 1840000000-203f000000
NUMA: Allocated memnodemap from c000 - 4c800
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000840000000
NODE_DATA [000000000004c800 - 00000000000807ff]
bootmap [0000000000100000 - 0000000000207fff] pages 108
(9 early reservations) ==> bootmem [0000000000 - 0840000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201b0a4] TEXT DATA BSS ==> [0001000000 - 000201b0a4]
#3 [003702c000 - 0037fef4a7] RAMDISK ==> [003702c000 - 0037fef4a7]
#4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
#5 [000201c000 - 000201c188] BRK ==> [000201c000 - 000201c188]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000]
#8 [000000c000 - 000004c800] MEMNODEMAP ==> [000000c000 - 000004c800]
Bootmem setup node 1 0000000840000000-0000001040000000
NODE_DATA [0000000840000040 - 000000084003403f]
bootmap [0000000840035000 - 0000000840134fff] pages 100
(9 early reservations) ==> bootmem [0840000000 - 1040000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000201b0a4] TEXT DATA BSS
#3 [003702c000 - 0037fef4a7] RAMDISK
#4 [000009e800 - 0000100000] BIOS reserved
#5 [000201c000 - 000201c188] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000c000] PGTABLE
#8 [000000c000 - 000004c800] MEMNODEMAP
Bootmem setup node 2 0000001040000000-0000001840000000
NODE_DATA [0000001040000080 - 000000104003407f]
bootmap [0000001040035000 - 0000001040134fff] pages 100
(9 early reservations) ==> bootmem [1040000000 - 1840000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000201b0a4] TEXT DATA BSS
#3 [003702c000 - 0037fef4a7] RAMDISK
#4 [000009e800 - 0000100000] BIOS reserved
#5 [000201c000 - 000201c188] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000c000] PGTABLE
#8 [000000c000 - 000004c800] MEMNODEMAP
Bootmem setup node 3 0000001840000000-000000203efff000
NODE_DATA [00000018400000c0 - 00000018400340bf]
bootmap [0000001840035000 - 0000001840134dff] pages 100
(9 early reservations) ==> bootmem [1840000000 - 203efff000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000201b0a4] TEXT DATA BSS
#3 [003702c000 - 0037fef4a7] RAMDISK
#4 [000009e800 - 0000100000] BIOS reserved
#5 [000201c000 - 000201c188] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000c000] PGTABLE
#8 [000000c000 - 000004c800] MEMNODEMAP
found SMP MP-table at [ffff8800000f4f60] f4f60
[ffffea0000000000-ffffea000f7fffff] PMD -> [ffff880028600000-ffff880036ffffff] on node 0
[ffffea000f800000-ffffea001cdfffff] PMD -> [ffff880038000000-ffff8800455fffff] on node 0
[ffffea001ce00000-ffffea0038dfffff] PMD -> [ffff880840200000-ffff88085c1fffff] on node 1
[ffffea0038e00000-ffffea003fffffff] PMD -> [ffff881040200000-ffff8810473fffff] on node 2
[ffffea0040000000-ffffea0054dfffff] PMD -> [ffff881047600000-ffff88105c3fffff] on node 2
[ffffea0054e00000-ffffea0070dfffff] PMD -> [ffff881840200000-ffff88185c1fffff] on node 3
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0203efff
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000001 -> 0x0000009e
0: 0x00000100 -> 0x000bde1c
0: 0x000bde4c -> 0x000bde4d
0: 0x00100000 -> 0x00840000
1: 0x00840000 -> 0x01040000
2: 0x01040000 -> 0x01840000
3: 0x01840000 -> 0x0203efff
On node 0 totalpages: 8379834
DMA zone: 56 pages used for memmap
DMA zone: 168 pages reserved
DMA zone: 3773 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 759381 pages, LIFO batch:31
Normal zone: 103936 pages used for memmap
Normal zone: 7498240 pages, LIFO batch:31
On node 1 totalpages: 8388608
Normal zone: 114688 pages used for memmap
Normal zone: 8273920 pages, LIFO batch:31
On node 2 totalpages: 8388608
Normal zone: 114688 pages used for memmap
Normal zone: 8273920 pages, LIFO batch:31
On node 3 totalpages: 8384511
Normal zone: 114632 pages used for memmap
Normal zone: 8269879 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x920
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x40] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x41] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x42] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x43] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x44] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x45] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x46] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x47] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x48] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x49] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x4a] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x4b] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x4c] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x4d] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x4e] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2f] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x4f] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xe7ffc000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 33, address 0xe7ffc000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x1166a201 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bde1c000 - 00000000bde4c000
PM: Registered nosave memory: 00000000bde4d000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:4
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u262144
pcpu-alloc: s94552 r8192 d24232 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 [1] 01 03 05 07 09 11 13 15
pcpu-alloc: [2] 16 18 20 22 24 26 28 30 [3] 17 19 21 23 25 27 29 31
Built 4 zonelists in Zone order, mobility grouping on. Total pages: 33079113
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_opteron-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_opteron/lv_root KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD rd_LVM_LV=vg_opteron/lv_swap SYSFONT=latarcyrheb-sun16 rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 132227192k/135249916k available (5220k kernel code, 1083672k absent, 1939052k reserved, 7121k data, 1264k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1208
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 536870912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2600.102 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.20 BogoMIPS (lpj=2600102)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 00be000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21428 entries in 85 pages
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Opteron(tm) Processor 6282 SE stepping 02
Performance Events: Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR c0010200 is 430076)
AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 2, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 2, Processors #3 Ok.
Booting Node 0, Processors #4 Ok.
Booting Node 2, Processors #5 Ok.
Booting Node 0, Processors #6 Ok.
Booting Node 2, Processors #7 Ok.
Booting Node 0, Processors #8 Ok.
Booting Node 2, Processors #9 Ok.
Booting Node 0, Processors #10 Ok.
Booting Node 2, Processors #11 Ok.
Booting Node 0, Processors #12 Ok.
Booting Node 2, Processors #13 Ok.
Booting Node 0, Processors #14 Ok.
Booting Node 2, Processors #15 Ok.
Booting Node 1, Processors #16 Ok.
Booting Node 3, Processors #17 Ok.
Booting Node 1, Processors #18 Ok.
Booting Node 3, Processors #19 Ok.
Booting Node 1, Processors #20 Ok.
Booting Node 3, Processors #21 Ok.
Booting Node 1, Processors #22 Ok.
Booting Node 3, Processors #23 Ok.
Booting Node 1, Processors #24 Ok.
Booting Node 3, Processors #25 Ok.
Booting Node 1, Processors #26 Ok.
Booting Node 3, Processors #27 Ok.
Booting Node 1, Processors #28 Ok.
Booting Node 3, Processors #29 Ok.
Booting Node 1, Processors #30 Ok.
Booting Node 3, Processors #31 Ok.
Brought up 32 CPUs
Total of 32 processors activated (166391.23 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
PCI: MCFG area at c0000000 reserved in E820
PCI: Using MMCONFIG at c0000000 - cfffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A08:00: host bridge window [mem 0xe7f00000-0xfdffffff]
pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed03fff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0x1000-0x1007]
pci 0000:00:11.0: reg 14: [io 0x1008-0x100b]
pci 0000:00:11.0: reg 18: [io 0x1010-0x1017]
pci 0000:00:11.0: reg 1c: [io 0x1018-0x101b]
pci 0000:00:11.0: reg 20: [io 0x1020-0x102f]
pci 0000:00:11.0: reg 24: [mem 0xf38f0000-0xf38f03ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: reg 10: [mem 0xf38e0000-0xf38e0fff]
pci 0000:00:12.1: reg 10: [mem 0xf38d0000-0xf38d0fff]
pci 0000:00:12.2: reg 10: [mem 0xf38c0000-0xf38c00ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xf38b0000-0xf38b0fff]
pci 0000:00:13.1: reg 10: [mem 0xf38a0000-0xf38a0fff]
pci 0000:00:13.2: reg 10: [mem 0xf3890000-0xf38900ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:14.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:14.1: reg 20: [io 0x0500-0x050f]
pci 0000:09:00.0: reg 10: [mem 0xfdfe0000-0xfdffffff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:03.0: PCI bridge to [bus 09-11]
pci 0000:00:03.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:04.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:04.0: PME# disabled
pci 0000:0a:05.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:05.0: PME# disabled
pci 0000:0a:06.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:06.0: PME# disabled
pci 0000:09:00.0: PCI bridge to [bus 0a-11]
pci 0000:09:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:09:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:09:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:04.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:04.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:0a:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:0a:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:05.0: PCI bridge to [bus 0c-0e]
pci 0000:0a:05.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:0a:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:0a:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:06.0: PCI bridge to [bus 0f-11]
pci 0000:0a:06.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:0a:06.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:0a:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xf6000000-0xf7ffffff 64bit]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:04:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 04-04]
pci 0000:00:04.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:00:04.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:05:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.1: PME# disabled
pci 0000:00:06.0: PCI bridge to [bus 05-05]
pci 0000:00:06.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:00:06.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:02:00.0: reg 14: [mem 0xf3cf0000-0xf3cf01ff]
pci 0000:02:00.0: reg 18: [io 0x3400-0x34ff]
pci 0000:02:00.2: reg 10: [io 0x3800-0x38ff]
pci 0000:02:00.2: reg 14: [mem 0xf3ce0000-0xf3ce00ff]
pci 0000:02:00.2: reg 18: [mem 0xf3b00000-0xf3bfffff]
pci 0000:02:00.2: reg 1c: [mem 0xf3a80000-0xf3afffff]
pci 0000:02:00.2: reg 20: [mem 0xf3a70000-0xf3a77fff]
pci 0000:02:00.2: reg 24: [mem 0xf3a60000-0xf3a67fff]
pci 0000:02:00.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
pci 0000:02:00.2: PME# disabled
pci 0000:02:00.4: reg 20: [io 0x3c00-0x3c1f]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0a.0: bridge window [mem 0xf3a00000-0xf3cfffff]
pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xf3e00000-0xf3ffffff 64bit]
pci 0000:03:00.0: reg 18: [mem 0xf3df0000-0xf3df0fff 64bit]
pci 0000:03:00.0: reg 20: [io 0x4000-0x40ff]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:03:00.0: PME# supported from D0
pci 0000:03:00.0: PME# disabled
pci 0000:00:0d.0: PCI bridge to [bus 03-03]
pci 0000:00:0d.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0d.0: bridge window [mem 0xf3d00000-0xf3ffffff]
pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:03.0: reg 10: [mem 0xe8000000-0xefffffff pref]
pci 0000:01:03.0: reg 14: [io 0x2000-0x20ff]
pci 0000:01:03.0: reg 18: [mem 0xf39f0000-0xf39fffff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:14.4: bridge window [mem 0xf3900000-0xf39fffff]
pci 0000:00:14.4: bridge window [mem 0xe8000000-0xefffffff pref]
pci 0000:00:14.4: bridge window [mem 0xe7f00000-0xfdffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x1000-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed00000-0xfed03fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G113._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G134._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G136._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G13A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G13D._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [I020] (IRQs *24)
ACPI: PCI Interrupt Link [I021] (IRQs *25)
ACPI: PCI Interrupt Link [I022] (IRQs *26)
ACPI: PCI Interrupt Link [I023] (IRQs *27)
ACPI: PCI Interrupt Link [I030] (IRQs *28)
ACPI: PCI Interrupt Link [I031] (IRQs *29)
ACPI: PCI Interrupt Link [I032] (IRQs *30)
ACPI: PCI Interrupt Link [I033] (IRQs *31)
ACPI: PCI Interrupt Link [I040] (IRQs *44)
ACPI: PCI Interrupt Link [I041] (IRQs *45)
ACPI: PCI Interrupt Link [I042] (IRQs *46)
ACPI: PCI Interrupt Link [I043] (IRQs *47)
ACPI: PCI Interrupt Link [I050] (IRQs *51)
ACPI: PCI Interrupt Link [I051] (IRQs *48)
ACPI: PCI Interrupt Link [I052] (IRQs *49)
ACPI: PCI Interrupt Link [I053] (IRQs *50)
ACPI: PCI Interrupt Link [I060] (IRQs *48)
ACPI: PCI Interrupt Link [I061] (IRQs *49)
ACPI: PCI Interrupt Link [I062] (IRQs *50)
ACPI: PCI Interrupt Link [I063] (IRQs *51)
ACPI: PCI Interrupt Link [I070] (IRQs *47)
ACPI: PCI Interrupt Link [I071] (IRQs *44)
ACPI: PCI Interrupt Link [I072] (IRQs *45)
ACPI: PCI Interrupt Link [I073] (IRQs *46)
ACPI: PCI Interrupt Link [I090] (IRQs *24)
ACPI: PCI Interrupt Link [I091] (IRQs *24)
ACPI: PCI Interrupt Link [I092] (IRQs *24)
ACPI: PCI Interrupt Link [I093] (IRQs *24)
ACPI: PCI Interrupt Link [I0A0] (IRQs *24)
ACPI: PCI Interrupt Link [I0A1] (IRQs *25)
ACPI: PCI Interrupt Link [I0A2] (IRQs *26)
ACPI: PCI Interrupt Link [I0A3] (IRQs *27)
ACPI: PCI Interrupt Link [I0B0] (IRQs *32)
ACPI: PCI Interrupt Link [I0B1] (IRQs *33)
ACPI: PCI Interrupt Link [I0B2] (IRQs *34)
ACPI: PCI Interrupt Link [I0B3] (IRQs *35)
ACPI: PCI Interrupt Link [I0C0] (IRQs *36)
ACPI: PCI Interrupt Link [I0C1] (IRQs *37)
ACPI: PCI Interrupt Link [I0C2] (IRQs *38)
ACPI: PCI Interrupt Link [I0C3] (IRQs *39)
ACPI: PCI Interrupt Link [I0D0] (IRQs *40)
ACPI: PCI Interrupt Link [I0D1] (IRQs *41)
ACPI: PCI Interrupt Link [I0D2] (IRQs *42)
ACPI: PCI Interrupt Link [I0D3] (IRQs *43)
ACPI: PCI Interrupt Link [BI02] (IRQs *52)
ACPI: PCI Interrupt Link [BI03] (IRQs *52)
ACPI: PCI Interrupt Link [BI04] (IRQs *52)
ACPI: PCI Interrupt Link [BI05] (IRQs *52)
ACPI: PCI Interrupt Link [BI06] (IRQs *53)
ACPI: PCI Interrupt Link [BI07] (IRQs *54)
ACPI: PCI Interrupt Link [BI08] (IRQs *54)
ACPI: PCI Interrupt Link [BI09] (IRQs *54)
ACPI: PCI Interrupt Link [BI0A] (IRQs *24)
ACPI: PCI Interrupt Link [BI0B] (IRQs *54)
ACPI: PCI Interrupt Link [BI0C] (IRQs *54)
ACPI: PCI Interrupt Link [BI0D] (IRQs *54)
ACPI: PCI Interrupt Link [PI20] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI21] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI22] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI23] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI30] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI31] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI32] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI33] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI40] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI41] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI42] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI43] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI50] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI51] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI52] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI53] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI60] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI61] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI62] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI63] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI70] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI71] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI72] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI73] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI90] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI91] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI92] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PI93] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIA3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIB3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIC3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PID3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR3] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR4] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR5] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR6] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR7] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR8] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIR9] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [PIRD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [USB1] (IRQs *22)
ACPI: PCI Interrupt Link [USB2] (IRQs *23)
ACPI: PCI Interrupt Link [USB3] (IRQs *23)
ACPI: PCI Interrupt Link [USB4] (IRQs *22)
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [U1PI] (IRQs) *0
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [U2PI] (IRQs) *0
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [U3PI] (IRQs) *0
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [U4PI] (IRQs) *0
ACPI: PCI Interrupt Link [SATA] (IRQs *16)
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [SATP] (IRQs) *0
ACPI: PCI Interrupt Link [VIDA] (IRQs *16)
ACPI: Invalid _PRS IRQ 0
ACPI: PCI Interrupt Link [VIDP] (IRQs) *0
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0020-0x003f]
pnp 00:01: [io 0x00a0-0x00bf]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0070-0x0079]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x00f0]
pnp 00:01: [io 0x0379-0x037a]
pnp 00:01: [io 0x0400-0x043f]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x04d6]
pnp 00:01: [io 0x0520]
pnp 00:01: [io 0x0580-0x059f]
pnp 00:01: [io 0x0600-0x067f]
pnp 00:01: [io 0x0700-0x0703]
pnp 00:01: [io 0x0820-0x082f]
pnp 00:01: [io 0x0900-0x09fe]
pnp 00:01: [io 0x0c06-0x0c07]
pnp 00:01: [io 0x0c14]
pnp 00:01: [io 0x0c4a]
pnp 00:01: [io 0x0c50-0x0c52]
pnp 00:01: [io 0x0c6c]
pnp 00:01: [io 0x0c6f]
pnp 00:01: [io 0x0c80-0x0c83]
pnp 00:01: [io 0x0c90-0x0c9f]
pnp 00:01: [io 0x0ca0-0x0ca5]
pnp 00:01: [io 0x0cd0-0x0cdf]
pnp 00:01: [io 0x0f50-0x0f58]
pnp 00:01: [io 0x0b00-0x0b3f]
pnp 00:01: [io 0x02f8-0x02ff]
pnp 00:01: [mem 0xc0000000-0xcfffffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0ca2-0x0ca3]
pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [dma 7]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:08: [io 0x002e-0x002f]
pnp 00:08: [io 0x0620-0x065f]
pnp 00:08: [io 0x0680-0x069f]
pnp 00:08: [io 0x0600-0x061f]
pnp 00:08: [io 0x0660-0x067f]
pnp 00:08: [io 0x0300-0x031f]
pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:09: [irq 4]
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:0a: [io 0x0070-0x0071]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0379-0x037a] has been reserved
system 00:01: [io 0x0400-0x043f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0520] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x067f] has been reserved
system 00:01: [io 0x0700-0x0703] has been reserved
system 00:01: [io 0x0820-0x082f] has been reserved
system 00:01: [io 0x0900-0x09fe] has been reserved
system 00:01: [io 0x0c06-0x0c07] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c4a] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0c90-0x0c9f] has been reserved
system 00:01: [io 0x0ca0-0x0ca5] has been reserved
system 00:01: [io 0x0cd0-0x0cdf] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0b00-0x0b3f] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved
PCI: max bus depth: 3 pci_try_num: 4
pci 0000:00:04.0: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
pci 0000:00:06.0: BAR 15: assigned [mem 0xf0100000-0xf01fffff pref]
pci 0000:00:0a.0: BAR 15: assigned [mem 0xf0200000-0xf02fffff pref]
pci 0000:00:0d.0: BAR 15: assigned [mem 0xf0300000-0xf03fffff pref]
pci 0000:0a:05.0: BAR 14: can't assign mem (size 0x200000)
pci 0000:0a:05.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:0a:05.0: BAR 13: can't assign io (size 0x1000)
pci 0000:0a:04.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:04.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:04.0: bridge window [io disabled]
pci 0000:0a:04.0: bridge window [mem disabled]
pci 0000:0a:04.0: bridge window [mem pref disabled]
pci 0000:0a:05.0: PCI bridge to [bus 0c-0e]
pci 0000:0a:05.0: PCI bridge to [bus 0c-0e]
pci 0000:0a:05.0: bridge window [io disabled]
pci 0000:0a:05.0: bridge window [mem disabled]
pci 0000:0a:05.0: bridge window [mem pref disabled]
pci 0000:0a:06.0: PCI bridge to [bus 0f-11]
pci 0000:0a:06.0: PCI bridge to [bus 0f-11]
pci 0000:0a:06.0: bridge window [io disabled]
pci 0000:0a:06.0: bridge window [mem disabled]
pci 0000:0a:06.0: bridge window [mem pref disabled]
pci 0000:09:00.0: PCI bridge to [bus 0a-11]
pci 0000:09:00.0: PCI bridge to [bus 0a-11]
pci 0000:09:00.0: bridge window [io disabled]
pci 0000:09:00.0: bridge window [mem disabled]
pci 0000:09:00.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 09-11]
pci 0000:00:03.0: PCI bridge to [bus 09-11]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:04:00.0: BAR 6: assigned [mem 0xf0000000-0xf000ffff pref]
pci 0000:04:00.1: BAR 6: assigned [mem 0xf0010000-0xf001ffff pref]
pci 0000:00:04.0: PCI bridge to [bus 04-04]
pci 0000:00:04.0: PCI bridge to [bus 04-04]
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xf0100000-0xf010ffff pref]
pci 0000:05:00.1: BAR 6: assigned [mem 0xf0110000-0xf011ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 05-05]
pci 0000:00:06.0: PCI bridge to [bus 05-05]
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff pref]
pci 0000:02:00.2: BAR 6: assigned [mem 0xf0200000-0xf020ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0a.0: bridge window [mem 0xf3a00000-0xf3cfffff]
pci 0000:00:0a.0: bridge window [mem 0xf0200000-0xf02fffff pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf0300000-0xf037ffff pref]
pci 0000:00:0d.0: PCI bridge to [bus 03-03]
pci 0000:00:0d.0: PCI bridge to [bus 03-03]
pci 0000:00:0d.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0d.0: bridge window [mem 0xf3d00000-0xf3ffffff]
pci 0000:00:0d.0: bridge window [mem 0xf0300000-0xf03fffff pref]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf3900000-0xf391ffff pref]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:14.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:14.4: bridge window [mem 0xf3900000-0xf39fffff]
pci 0000:00:14.4: bridge window [mem 0xe8000000-0xefffffff pref]
ACPI: PCI Interrupt Link [BI03] enabled at IRQ 52
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
pci 0000:00:03.0: PCI INT A -> Link[BI03] -> GSI 52 (level, high) -> IRQ 52
pci 0000:00:03.0: setting latency timer to 64
ACPI: PCI Interrupt Link [I030] enabled at IRQ 28
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pci 0000:09:00.0: PCI INT A -> Link[I030] -> GSI 28 (level, high) -> IRQ 28
pci 0000:09:00.0: setting latency timer to 64
pci 0000:0a:04.0: PCI INT A -> Link[I030] -> GSI 28 (level, high) -> IRQ 28
pci 0000:0a:04.0: setting latency timer to 64
ACPI: PCI Interrupt Link [I031] enabled at IRQ 29
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pci 0000:0a:05.0: PCI INT A -> Link[I031] -> GSI 29 (level, high) -> IRQ 29
pci 0000:0a:05.0: setting latency timer to 64
ACPI: PCI Interrupt Link [I032] enabled at IRQ 30
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
pci 0000:0a:06.0: PCI INT A -> Link[I032] -> GSI 30 (level, high) -> IRQ 30
pci 0000:0a:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [BI04] enabled at IRQ 52
pci 0000:00:04.0: PCI INT A -> Link[BI04] -> GSI 52 (level, high) -> IRQ 52
pci 0000:00:04.0: setting latency timer to 64
ACPI: PCI Interrupt Link [BI06] enabled at IRQ 53
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
pci 0000:00:06.0: PCI INT A -> Link[BI06] -> GSI 53 (level, high) -> IRQ 53
pci 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [BI0A] enabled at IRQ 24
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pci 0000:00:0a.0: PCI INT A -> Link[BI0A] -> GSI 24 (level, high) -> IRQ 24
pci 0000:00:0a.0: setting latency timer to 64
ACPI: PCI Interrupt Link [BI0D] enabled at IRQ 54
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
pci 0000:00:0d.0: PCI INT A -> Link[BI0D] -> GSI 54 (level, high) -> IRQ 54
pci 0000:00:0d.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0xe7f00000-0xfdffffff]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed03fff]
pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 11 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 12 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 13 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff pref]
pci_bus 0000:05: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:05: resource 2 [mem 0xf0100000-0xf01fffff pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xf3a00000-0xf3cfffff]
pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf02fffff pref]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xf3d00000-0xf3ffffff]
pci_bus 0000:03: resource 2 [mem 0xf0300000-0xf03fffff pref]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xf3900000-0xf39fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref]
pci_bus 0000:01: resource 4 [mem 0xe7f00000-0xfdffffff]
pci_bus 0000:01: resource 5 [io 0x1000-0xffff]
pci_bus 0000:01: resource 6 [io 0x0000-0x03af]
pci_bus 0000:01: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:01: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed03fff]
pci_bus 0000:01: resource 10 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 11 [io 0x03b0-0x03bb]
pci_bus 0000:01: resource 12 [io 0x03c0-0x03df]
pci_bus 0000:01: resource 13 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [USB1] enabled at IRQ 22
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
pci 0000:00:12.0: PCI INT A -> Link[USB1] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.1: PCI INT A -> Link[USB1] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:12.1: PCI INT A disabled
ACPI: PCI Interrupt Link [USB2] enabled at IRQ 23
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:12.2: PCI INT B -> Link[USB2] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:12.2: PCI INT B disabled
ACPI: PCI Interrupt Link [USB3] enabled at IRQ 23
pci 0000:00:13.0: PCI INT A -> Link[USB3] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.1: PCI INT A -> Link[USB3] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:13.1: PCI INT A disabled
ACPI: PCI Interrupt Link [USB4] enabled at IRQ 22
pci 0000:00:13.2: PCI INT B -> Link[USB4] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:13.2: PCI INT B disabled
ACPI: PCI Interrupt Link [I071] enabled at IRQ 44
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
pci 0000:02:00.4: PCI INT B -> Link[I071] -> GSI 44 (level, high) -> IRQ 44
pci 0000:02:00.4: PCI INT B disabled
pci 0000:01:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16141k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1371213102.048:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key DB6BC3CB5AEBCDD6
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:09:00.0: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
pcieport 0000:09:00.0: irq 56 for MSI/MSI-X
pcieport 0000:0a:04.0: setting latency timer to 64
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
pcieport 0000:0a:04.0: irq 57 for MSI/MSI-X
pcieport 0000:0a:05.0: setting latency timer to 64
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
pcieport 0000:0a:05.0: irq 58 for MSI/MSI-X
pcieport 0000:0a:06.0: setting latency timer to 64
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
pcieport 0000:0a:06.0: irq 59 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: Adding SMBIOS-specified kcs state machine: duplicate interface
ipmi_si: Adding ACPI-specified kcs state machine: duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: APEI: Invalid bit width + offset in GAR [0xe8028/64/0/2/0]
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> Link[USB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 23, io mem 0xf38c0000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> Link[USB4] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 22, io mem 0xf3890000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-358.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> Link[USB1] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 22, io mem 0xf38e0000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-358.el6.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> Link[USB1] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 22, io mem 0xf38d0000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-358.el6.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> Link[USB3] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 23, io mem 0xf38b0000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-358.el6.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> Link[USB3] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 23, io mem 0xf38a0000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-358.el6.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:02:00.4: PCI INT B -> Link[I071] -> GSI 44 (level, high) -> IRQ 44
uhci_hcd 0000:02:00.4: setting latency timer to 64
uhci_hcd 0000:02:00.4: UHCI Host Controller
uhci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 7
uhci_hcd 0000:02:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:02:00.4: irq 44, io base 0x00003c00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-358.el6.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:02:00.4
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:0a: setting system clock to 2013-06-14 12:31:44 UTC (1371213104)
Initalizing network drop monitor service
Freeing unused kernel memory: 1264k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 904k freed
Freeing unused kernel memory: 1676k freed
dracut: dracut-004-303.el6
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com
udev: starting version 147
CE: hpet increasing min_delta_ns to 40226 nsec
CE: hpet increasing min_delta_ns to 60338 nsec
CE: hpet increasing min_delta_ns to 90506 nsec
[drm] Initialized drm 1.1.0 20060810
Refined TSC clocksource calibration: 2599.999 MHz.
Switching to clocksource tsc
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
ACPI: PCI Interrupt Link [VIDA] enabled at IRQ 16
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
radeon 0000:01:03.0: PCI INT A -> Link[VIDA] -> GSI 16 (level, low) -> IRQ 16
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB).
[drm] register mmio base: 0xF39F0000
[drm] register mmio size: 65536
radeon 0000:01:03.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (64M used)
radeon 0000:01:03.0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 66123590 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 64M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000037880000).
radeon 0000:01:03.0: WB disabled
radeon 0000:01:03.0: fence driver on ring 0 use gpu addr 0x00000000c8000000 and cpu addr 0xffff880037821000
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x00000000C8001000
[drm] ring test succeeded in 1 usecs
usb 7-1: new full speed USB device number 2 using uhci_hcd
usb 7-1: New USB device found, idVendor=03f0, idProduct=7029
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: Virtual Keyboard
usb 7-1: Manufacturer: HP
usb 7-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:0a.0/0000:02:00.4/usb7/7-1/7-1:1.0/input/input3
generic-usb 0003:03F0:7029.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:0a.0/0000:02:00.4/usb7/7-1/7-1:1.1/input/input4
generic-usb 0003:03F0:7029.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:02:00.4-1/input1
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] VGA-2
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
CE: hpet increasing min_delta_ns to 135758 nsec
CE: hpet increasing min_delta_ns to 203636 nsec
CE: hpet increasing min_delta_ns to 305454 nsec
CE: hpet increasing min_delta_ns to 458180 nsec
CE: hpet increasing min_delta_ns to 687270 nsec
[drm] fb mappable at 0xE8040000
[drm] vram apper at 0xE8000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fbcon: radeondrmfb (fb0) is primary device
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.22.0 20080528 for 0000:01:03.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:11.0: version 3.0
ACPI: PCI Interrupt Link [SATA] enabled at IRQ 16
ahci 0000:00:11.0: PCI INT A -> Link[SATA] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf38f0000 port 0xf38f0100 irq 16
ata1: SATA link down (SStatus 0 SControl 300)
pata_atiixp 0000:00:14.1: can't derive routing for PCI INT A
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi1 : pata_atiixp
scsi2 : pata_atiixp
ata2: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata3: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
ata3.00: ATAPI: hp DVD A DS8A5LH, 1HE4, max UDMA/100
ata3.00: limited to UDMA/33 due to 40-wire cable
ata3.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM hp DVD A DS8A5LH 1HE4 PQ: 0 ANSI: 5
HP HPSA Driver (v 3.2.0-RH1)
ACPI: PCI Interrupt Link [I0D0] enabled at IRQ 40
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: PCI INT A -> Link[I0D0] -> GSI 40 (level, high) -> IRQ 40
hpsa 0000:03:00.0: setting latency timer to 64
hpsa 0000:03:00.0: MSIX
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
hpsa 0000:03:00.0: irq 67 for MSI/MSI-X
hpsa 0000:03:00.0: hpsa0: at IRQ 60 using DAC
scsi3 : hpsa
hpsa 0000:03:00.0: RAID device c3b3t0l0 added.
hpsa 0000:03:00.0: Direct-Access device c3b0t0l0 added.
scsi 3:3:0:0: RAID HP P410i 6.00 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access HP LOGICAL VOLUME 6.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sd 3:0:0:0: [sda] 3515231324 512-byte logical blocks: (1.79 TB/1.63 TiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 6b 00 00 08
sd 3:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes vg_opteron/lv_root vg_opteron/lv_swap
dracut: inactive '/dev/vg_opteron/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_opteron/lv_swap' [4.00 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_opteron-lv_root
dracut: Loading SELinux policy
type=1404 audit(1371213107.273:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 276421 rules.
SELinux: 2048 avtab hash slots, 276421 rules.
SELinux: 9 users, 12 roles, 3889 types, 201 bools, 1 sens, 1024 cats
SELinux: 81 classes, 276421 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1371213107.674:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0 Jan 29 2013
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS0: Registered DDR3 RAM
EDAC amd64: CS1: Registered DDR3 RAM
EDAC amd64: CS4: Registered DDR3 RAM
EDAC amd64: CS5: Registered DDR3 RAM
EDAC MC0: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:18.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 1).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS0: Registered DDR3 RAM
EDAC amd64: CS1: Registered DDR3 RAM
EDAC amd64: CS4: Registered DDR3 RAM
EDAC amd64: CS5: Registered DDR3 RAM
EDAC MC1: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:19.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 2).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS0: Registered DDR3 RAM
EDAC amd64: CS1: Registered DDR3 RAM
EDAC amd64: CS4: Registered DDR3 RAM
EDAC amd64: CS5: Registered DDR3 RAM
EDAC MC2: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1a.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 3).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 4096MB 1: 4096MB
EDAC amd64: MC: 2: 0MB 3: 0MB
EDAC amd64: MC: 4: 4096MB 5: 4096MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS0: Registered DDR3 RAM
EDAC amd64: CS1: Registered DDR3 RAM
EDAC amd64: CS4: Registered DDR3 RAM
EDAC amd64: CS5: Registered DDR3 RAM
EDAC MC3: Giving out device to 'amd64_edac' 'F15h': DEV 0000:00:1b.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:3:0:0: Attached scsi generic sg1 type 12
sd 3:0:0:0: Attached scsi generic sg2 type 0
platform microcode: firmware: requesting amd-ucode/microcode_amd_fam15h.bin
microcode: CPU0: patch_level=0x6000626
microcode: CPU0: updated (new patch_level=0x6000629)
microcode: CPU1: patch_level=0x6000626
microcode: CPU1: updated (new patch_level=0x6000629)
microcode: CPU2: patch_level=0x6000629
microcode: CPU3: patch_level=0x6000629
microcode: CPU4: patch_level=0x6000626
microcode: CPU4: updated (new patch_level=0x6000629)
microcode: CPU5: patch_level=0x6000626
microcode: CPU5: updated (new patch_level=0x6000629)
microcode: CPU6: patch_level=0x6000629
microcode: CPU7: patch_level=0x6000629
microcode: CPU8: patch_level=0x6000626
microcode: CPU8: updated (new patch_level=0x6000629)
microcode: CPU9: patch_level=0x6000626
microcode: CPU9: updated (new patch_level=0x6000629)
microcode: CPU10: patch_level=0x6000629
microcode: CPU11: patch_level=0x6000629
microcode: CPU12: patch_level=0x6000626
microcode: CPU12: updated (new patch_level=0x6000629)
microcode: CPU13: patch_level=0x6000626
microcode: CPU13: updated (new patch_level=0x6000629)
microcode: CPU14: patch_level=0x6000629
microcode: CPU15: patch_level=0x6000629
microcode: CPU16: patch_level=0x6000626
microcode: CPU16: updated (new patch_level=0x6000629)
microcode: CPU17: patch_level=0x6000626
microcode: CPU17: updated (new patch_level=0x6000629)
microcode: CPU18: patch_level=0x6000629
microcode: CPU19: patch_level=0x6000629
microcode: CPU20: patch_level=0x6000626
microcode: CPU20: updated (new patch_level=0x6000629)
microcode: CPU21: patch_level=0x6000626
microcode: CPU21: updated (new patch_level=0x6000629)
microcode: CPU22: patch_level=0x6000629
microcode: CPU23: patch_level=0x6000629
microcode: CPU24: patch_level=0x6000626
microcode: CPU24: updated (new patch_level=0x6000629)
microcode: CPU25: patch_level=0x6000626
microcode: CPU25: updated (new patch_level=0x6000629)
microcode: CPU26: patch_level=0x6000629
microcode: CPU27: patch_level=0x6000629
microcode: CPU28: patch_level=0x6000626
microcode: CPU28: updated (new patch_level=0x6000629)
microcode: CPU29: patch_level=0x6000626
microcode: CPU29: updated (new patch_level=0x6000629)
microcode: CPU30: patch_level=0x6000629
microcode: CPU31: patch_level=0x6000629
Microcode Update Driver: v2.00 , Peter Oruba
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
ACPI: PCI Interrupt Link [I040] enabled at IRQ 44
bnx2 0000:04:00.0: PCI INT A -> Link[I040] -> GSI 44 (level, high) -> IRQ 44
bnx2 0000:04:00.0: setting latency timer to 64
bnx2 0000:04:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:04:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:04:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 44, node addr e4:11:5b:b0:98:e4
ACPI: PCI Interrupt Link [I041] enabled at IRQ 45
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.1: PCI INT B -> Link[I041] -> GSI 45 (level, high) -> IRQ 45
bnx2 0000:04:00.1: setting latency timer to 64
bnx2 0000:04:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:04:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:04:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 45, node addr e4:11:5b:b0:98:e6
ACPI: PCI Interrupt Link [I050] enabled at IRQ 51
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: PCI INT A -> Link[I050] -> GSI 51 (level, high) -> IRQ 51
bnx2 0000:05:00.0: setting latency timer to 64
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:05:00.0: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem fa000000, IRQ 51, node addr e4:11:5b:b0:98:e8
ACPI: PCI Interrupt Link [I051] enabled at IRQ 48
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: PCI INT B -> Link[I051] -> GSI 48 (level, high) -> IRQ 48
bnx2 0000:05:00.1: setting latency timer to 64
bnx2 0000:05:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:05:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:05:00.1: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 48, node addr e4:11:5b:b0:98:ea
ACPI: PCI Interrupt Link [I070] enabled at IRQ 47
alloc irq_desc for 47 on node -1
alloc kstat_irqs on node -1
hpwdt 0000:02:00.0: PCI INT A -> Link[I070] -> GSI 47 (level, high) -> IRQ 47
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:02:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 0/OFF), priority: LAST (default = 0/LAST).
hpwdt 0000:02:00.0: HP Watchdog Timer Driver: 1.3.0, timer margin: 30 seconds (nowayout=0).
hpilo 0000:02:00.2: PCI INT B -> Link[I071] -> GSI 44 (level, high) -> IRQ 44
hpilo 0000:02:00.2: setting latency timer to 64
power_meter ACPI000D:00: Found ACPI power meter.
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
Adding 4194296k swap on /dev/mapper/vg_opteron-lv_swap. Priority:-1 extents:1 across:4194296k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.0: irq 68 for MSI/MSI-X
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.0: irq 69 for MSI/MSI-X
alloc irq_desc for 70 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.0: irq 70 for MSI/MSI-X
alloc irq_desc for 71 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.0: irq 71 for MSI/MSI-X
alloc irq_desc for 72 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.0: irq 72 for MSI/MSI-X
alloc irq_desc for 73 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.0: irq 73 for MSI/MSI-X
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.0: irq 74 for MSI/MSI-X
alloc irq_desc for 75 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.0: irq 75 for MSI/MSI-X
alloc irq_desc for 76 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.0: irq 76 for MSI/MSI-X
bnx2 0000:04:00.0: eth0: using MSIX
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2 0000:04:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
powernow-k8: Found 4 AMD Opteron(tm) Processor 6282 SE (32 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: 0 : pstate 0 (2600 MHz)
powernow-k8: 1 : pstate 1 (2300 MHz)
powernow-k8: 2 : pstate 2 (2000 MHz)
powernow-k8: 3 : pstate 3 (1700 MHz)
powernow-k8: 4 : pstate 4 (1400 MHz)
powernow-k8: 0 : pstate 0 (2600 MHz)
powernow-k8: 1 : pstate 1 (2300 MHz)
powernow-k8: 2 : pstate 2 (2000 MHz)
powernow-k8: 3 : pstate 3 (1700 MHz)
powernow-k8: 4 : pstate 4 (1400 MHz)
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
alloc irq_desc for 77 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.1: irq 77 for MSI/MSI-X
alloc irq_desc for 78 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.1: irq 78 for MSI/MSI-X
alloc irq_desc for 79 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.1: irq 79 for MSI/MSI-X
alloc irq_desc for 80 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.1: irq 80 for MSI/MSI-X
alloc irq_desc for 81 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.1: irq 81 for MSI/MSI-X
alloc irq_desc for 82 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.1: irq 82 for MSI/MSI-X
alloc irq_desc for 83 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.1: irq 83 for MSI/MSI-X
alloc irq_desc for 84 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.1: irq 84 for MSI/MSI-X
alloc irq_desc for 85 on node -1
alloc kstat_irqs on node -1
bnx2 0000:04:00.1: irq 85 for MSI/MSI-X
bnx2 0000:04:00.1: eth1: using MSIX
ADDRCONF(NETDEV_UP): eth1: link is not ready
alloc irq_desc for 86 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 86 for MSI/MSI-X
alloc irq_desc for 87 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 87 for MSI/MSI-X
alloc irq_desc for 88 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 88 for MSI/MSI-X
alloc irq_desc for 89 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 89 for MSI/MSI-X
alloc irq_desc for 90 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 90 for MSI/MSI-X
alloc irq_desc for 91 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 91 for MSI/MSI-X
alloc irq_desc for 92 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 92 for MSI/MSI-X
alloc irq_desc for 93 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 93 for MSI/MSI-X
alloc irq_desc for 94 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 94 for MSI/MSI-X
bnx2 0000:05:00.0: eth2: using MSIX
ADDRCONF(NETDEV_UP): eth2: link is not ready
alloc irq_desc for 95 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: irq 95 for MSI/MSI-X
alloc irq_desc for 96 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: irq 96 for MSI/MSI-X
alloc irq_desc for 97 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: irq 97 for MSI/MSI-X
alloc irq_desc for 98 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: irq 98 for MSI/MSI-X
alloc irq_desc for 99 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: irq 99 for MSI/MSI-X
alloc irq_desc for 100 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: irq 100 for MSI/MSI-X
alloc irq_desc for 101 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: irq 101 for MSI/MSI-X
alloc irq_desc for 102 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: irq 102 for MSI/MSI-X
alloc irq_desc for 103 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.1: irq 103 for MSI/MSI-X
bnx2 0000:05:00.1: eth3: using MSIX
ADDRCONF(NETDEV_UP): eth3: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
bnx2 0000:05:00.0: eth2: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
Ebtables v2.0 registered
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
eth2: no IPv6 routers present
fuse init (API version 7.13)
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
CE: hpet increasing min_delta_ns to 1030904 nsec